Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Repair in Van Nuys, CA
Most Van Nuys gate problems come down to two things: heat and age. Access control systems fail when a keypad’s circuit board cooks in a 105°F afternoon, and 1960s apartment gates bind in tracks that cracked decades ago. We repair both, and we price every job in writing before anyone touches a tool. Call (661) 495-2023 and you’ll get a live person, not a callback queue.
Why Van Nuys Homes Are Different
Van Nuys sits in the hottest part of the San Fernando Valley, where summer temperatures routinely pass 105°F. Automatic gate operators overheat. Metal frames expand and bind in their tracks. Rubber drive wheels degrade far faster than they do in coastal LA. On top of that, a large share of Van Nuys housing stock dates to the 1950s and 1960s: ranch-style single-family homes alongside dense mid-century apartment complexes. Many of those apartment buildings still run their original electric sliding gates, and many of those gates have been jury-rigged repeatedly over the years before anyone calls for a proper repair. We see bottom tracks set directly into concrete aprons that heaved and cracked from decades of Valley heat cycles. When the concrete is gone, no motor repair stays fixed until the track substrate itself is rebuilt. That reality shapes how we diagnose from the first visit.
Our Main Van Nuys Services
These are the three calls we run most often across Van Nuys, each with its own page that explains local conditions, prices, and what to expect.
Gate Repair in Van Nuys
Won’t open, won’t close, screeches at 7 a.m., or drops offline. Most repair calls in Van Nuys involve overheated operators, misaligned photo-eyes, cracked wheels, or gates that bind on warped track. On rental properties, we commonly find three or four prior handyman fixes stacked on top of each other. We name what we found, photograph it, price the fix in writing, and leave you a documented record. Gate Repair in Van Nuys

Gate Installation in Van Nuys
A new gate in Van Nuys has to survive 105°F summers, winter downpours, and soil that moves. We measure the existing concrete, check the setback, and spec a frame and track rated for the thermal swings this Valley gets. Installation work is quoted, scheduled, and built to last, not rushed out same-day. Gate Installation in Van Nuys

Gate Motor & Opener in Van Nuys
When the operator dies but the gate itself is sound, replacing just the motor is usually the smarter spend. We service nine automation brands, so we can match whatever is already on the property rather than forcing a full system swap. Heat kills operators in Van Nuys faster than almost anywhere in LA, so we set limits and torque for Valley conditions, then photograph the settings. Gate Motor & Opener in Van Nuys

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterGate Access Control in Van Nuys

Gate access control in Van Nuys means the keypads, telephone entry units, card readers, and video intercoms that decide who gets in. On aging Van Nuys apartment buildings, these systems are often 20 to 30 years old, and they fail in patterns that anyone working the Valley recognizes: sun-baked keypad membranes, phone entry units that stop dialing after a heat wave, card readers that corrode at the wiring block during winter rains. We repair what’s there first, upgrade when it’s genuinely dead, and write down exactly what we touched. Read more about how we handle Gate Access Control as a specialty.
Keypad Entry
Signs you need it
The keypad works in the morning but refuses codes by afternoon, or some numbers never register at all.
What it costs in Van Nuys
Most keypad replacements in Van Nuys run from $220 to $480, depending on whether the housing and wiring survive.
How we do it
We test the output at the board, check for heat damage, replace the unit or the board, and photograph the new code set before we leave.
Phone Entry
Signs you need it
The call rings once and drops, or visitors hear nothing even though the directory screen still lights up.
What it costs in Van Nuys
Phone entry repair in Van Nuys typically lands between $260 and $650, with replacement units higher when the cellular module is dead.
How we do it
We verify the dial tone at the unit, check the relay output to the gate operator, and either repair the board or replace the unit with a documented setting list.
What Gate Access Control Costs in Van Nuys
| Item | Typical range in Van Nuys |
|---|---|
| Keypad replacement | $220 - $480 |
| Phone entry repair | $260 - $650 |
| Card reader or receiver board | $180 - $380 |
Can you repair the old system or do I need to replace everything?
We repair first. Most Van Nuys systems have one failed component, not a dead system. We tell you the part, the price, and the evidence before we touch anything.
How fast can you get a gate access system working again?
In Van Nuys, most access control repairs are same-day or next-morning. Replacement parts for older DoorKing and Linear systems are usually available from our local stock.
Gate Parts & Welding in Van Nuys

Gate parts and welding in Van Nuys covers hinges, posts, rails, rollers, and the custom fabrication work that keeps older gates square and rolling. The Valley’s heat cycles and deferred maintenance on 1960s and 1970s apartment gates mean we see a lot of weld joints that have loosened over thousands of expansion-contraction cycles, and bottom tracks that cracked right through the concrete. A gate isn’t fixed by bolting a new part onto a broken foundation. We weld the frame, reset the post, and rebuild the track substrate when the job calls for it. Our Gate Parts & Welding page covers the full scope.
Hinge Replacement
Signs you need it
The gate sags toward the latch side and drags along the ground or the rail, leaving fresh scrape marks every week.
What it costs in Van Nuys
Hinge replacement in Van Nuys usually runs $140 to $320 per pair, depending on gate weight and whether we weld or bolt the new hinges on.
How we do it
We support the gate, cut or unbolt the old hinges, align and weld the new set, and photograph the finished alignment.
Custom Welding
Signs you need it
The gate frame has cracked at a corner or a picket has separated, and the crack opens and closes as the gate moves.
What it costs in Van Nuys
Custom welding in Van Nuys typically falls between $180 and $450 for cracked frames, with larger reinforcement jobs quoted by the hour plus materials.
How we do it
We grind the crack, weld it solid, reinforce the weak point if the rust is advanced, and leave you a photo of the repaired joint with the surrounding metal cleaned and primed.
What Gate Parts & Welding Costs in Van Nuys
| Item | Typical range in Van Nuys |
|---|---|
| Hinge replacement | $140 - $320 per pair |
| Custom welding / frame repair | $180 - $450 |
| Roller or wheel replacement | $90 - $220 per wheel |
Can a cracked gate frame be welded, or do I need a whole new gate?
Almost every crack can be welded if the surrounding metal is still sound. In Van Nuys, rust through the bottom rail is the main reason we recommend replacing rather than welding.
Do you replace just the rollers or the whole track?
We replace the rollers first and inspect the track. If the track has separated from cracked Van Nuys concrete, we quote the track rebuild as a written line item before any work starts.
Brands We Service in Van Nuys
We work on the automation brands most common in Van Nuys, including Ghost Controls, DoorKing, Elite, and Mighty Mule. Parts for these lines are stocked locally for faster turnaround. See the full brands list for everything we service.
Pricing for Gate Repair in Van Nuys, CA

| Service | Typical range in Van Nuys |
|---|---|
| Keypad replacement | $220 - $480 |
| Phone entry repair | $260 - $650 |
| Card reader or receiver board | $180 - $380 |
| Hinge replacement | $140 - $320 per pair |
| Custom welding / frame repair | $180 - $450 |
| Roller or wheel replacement | $90 - $220 per wheel |
| Gate motor replacement | $850 - $1,700 |
| Operator arm repair | $230 - $480 |
| Photo-eye alignment or replacement | $120 - $290 |
| Track repair or rebuild | $350 - $900 |
Prices in Van Nuys push upward when a gate has been neglected for years: cracked concrete under a bottom track, a motor that burned out because it was adjusted wrong, rust that ate through a weld point and into the frame. The written price we hand you before work starts covers everything we agreed to do. Nothing gets added at the end.
Neighborhoods We Serve in Van Nuys
We run calls across the whole Van Nuys area, from the apartment corridors near Victory and Sepulveda to the single-family streets south of Vanowen and the commercial gates along Van Nuys Boulevard. Most repair calls in Van Nuys are reached within an hour when you call before noon on weekdays.
- Valley Glen / Van Nuys border
- Mid-Town Van Nuys
- Van Nuys Airport area
- Hazeltine corridor
- Civic Center area
Service Area - Cities Near Van Nuys

Our Van Nuys crews also cover the surrounding Valley cities. If your property is just outside the Van Nuys boundary, you’re still in our normal dispatch area. We serve Sherman Oaks, CA, Panorama City, CA, Encino, CA, and Reseda, CA on the same schedules and with the same written-price policy.
Serving Van Nuys, CA - Our Local Coverage Area
We’re based in the Van Nuys area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Van Nuys

Most repair and part-replacement work on an existing gate needs no permit. Full gate replacement or new installation can trigger a permit depending on height, location, and any electrical run. We tell you which applies before work starts.
Most Van Nuys repair calls are reached the same day you call, often within an hour or two on weekday mornings. Emergency calls, like a gate stuck open across a driveway, are dispatched as they come in around the clock.
We work with Van Nuys property managers and HOAs regularly and write our quotes to the scope they need for board approval. A written price and photo record makes the approval go faster. Call (661) 495-2023 and we’ll set it up.
For a free, written estimate on any gate repair, access control, or welding job in Van Nuys, call (661) 495-2023. You’ll talk to a live person who can schedule the visit and tell you exactly what to expect on paper before anyone starts work.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Van Nuys Customers Say
"Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R.





Before
After
Before
After