Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Calabasas
A new driveway gate in Calabasas typically runs $4,800 to $14,500 installed, depending on the length, material, and whether we’re matching existing ornamental ironwork or starting from a clean post line. We schedule a free measure and written estimate within a few days of your call, and the price we hand you is the price you pay before any metal is ordered or any trench is cut. If you’re in The Oaks, Calabasas Park Estates, or anywhere along Mulholland Highway, call (661) 495-2023 and we’ll walk the site with you.
We know the difference between a Calabasas gate job and one in West Hills or Tarzana. It’s not the gate itself. It’s the approval path, the material matching, and the wind load the hardware has to survive. This page is written for homeowners here who need a gate that looks like it belongs on the house and operates quietly for years without sagging off its post.
Why Vance Gate Repair Chatsworth Is Calabasas’s Preferred Gate Installation Company
Most of our Calabasas work starts with a call from a homeowner who already has a gate on the property. Sometimes it’s an original wrought-iron gate from the late 1980s or 1990s that’s bent at the hinge post. Sometimes it’s a post-Woolsey Fire replacement that was installed quickly in 2019 and now sags or drags. We show up with a tape measure, a camera, and a notebook, and we write down what we find before we quote a dollar figure.
Adrian Vance founded this company in 2014 after years of commercial access-control documentation, and that habit carries into every residential job. Before we leave a Calabasas property, you get a written scope, a written price, and a photographed record of what was installed and how it was set. Under Haven Standard Clause 4, that photo log is included on every visit at no additional charge.
Our crews are dispatched from the brand’s Los Angeles office and serve Calabasas locally. A live person answers the phone at (661) 495-2023 around the clock. No voicemail loop, no callback queue. When you call about a gate that won’t open on Paseo Primario or a slide gate that jumped its track off Las Virgenes Road, you reach a person who can schedule the truck.
Our Gate Installation Services in Calabasas
Driveway Gate Installation in Calabasas
Driveway gates here are not off-the-shelf. Many Calabasas homes built from the late 1980s through the 2000s carry custom wrought-iron or powder-coated aluminum gates with scrollwork matched to the house. We fabricate to match existing panels when a gate needs replacing, and we build new driveway gates with the same eye toward proportion, post depth, and operator placement that a 400-pound swing leaf demands. On a new install, we set posts in concrete below the frost and wind-load depth for this hillside corridor.
Pedestrian Gate Installation in Calabasas
A pedestrian gate next to a driveway gate often carries its own lock, its own hinge hardware, and its own problems. We install standalone pedestrian gates and matched pairs that look like they were built with the driveway leaf. In HOA communities like Mountain View Estates, we coordinate the finish color and picket profile with the architectural committee’s existing spec before we order material.
Sliding Gate Installation in Calabasas
Sliding gates are common on narrower Calabasas lots where a swing leaf would eat too much driveway. We install cantilever and V-track slide gates with the roller assembly sized for the panel weight. Santa Ana winds here routinely blow debris into tracks along hillside streets, so we set track height and roller clearance with that in mind. A slide gate in Calabasas needs a different clearance spec than the same gate in a flat, sheltered part of the Valley.
Swing Gate Installation in Calabasas
Double swing gates are the signature look on Mediterranean and Spanish Colonial homes across Calabasas. We hang them with a plumb post and a hinge that carries the load without sagging. The wind corridor at the base of the Santa Monica Mountains foothills means a swing leaf takes more lateral force than a gate in Agoura Hills or Tarzana. We size the post and the operator for that, not for a calm afternoon.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Calabasas
We work on whatever motor is already on the property. Our trucks carry parts for LiftMaster, Elite, DoorKing, and Mighty Mule, along with four other major automation brands, so a Calabasas job rarely needs a second trip for a control board or a limit switch. If your existing operator has life left in it, we repair it. If the new gate needs an operator, we match the brand to the gate weight and cycle frequency, not to whatever happens to be on sale. We stock common replacement parts locally and can cut the turnaround on most Calabasas repairs to a single visit.
Common Gate Installation Problems We See in Calabasas Homes
- Wind-borne track failure on slide gates. Santa Ana gusts push a sliding gate sideways off its rollers and pack chaparral debris into the track. When we install a slide gate here, we set the track clearance and roller guards for a 60-mph gust, not a calm day.
- Sagging post-Woolsey Fire replacement gates. A lot of hillside gates were replaced quickly after the 2018 fire. Those posts and hinges are now hitting their first major service interval at the same time. We correct sag at the hinge post before we touch the panel, because a straight panel on a leaning post is a repeat job.
- HOA access-system conflicts. A new operator board installed without coordinating with the community’s master access vendor can lock a resident out of the entry transponder. We make that coordination call before we wire anything in The Oaks or Calabasas Park Estates.
- Ornamental ironwork that doesn’t match. A generic replacement panel on a custom iron driveway gate stands out from the street. We match scroll profiles, picket spacing, and finish tone to the existing work so the new section disappears into the old.
Pricing for Gate Installation in Calabasas, CA
Here are the numbers we quote most often in Calabasas, written the way we write every estimate.
- Single swing driveway gate, steel, matched to existing ironwork: $4,800-$8,200 installed, including posts and operator wiring rough-in.
- Double swing driveway gate, custom wrought-iron or powder-coated aluminum: $8,500-$14,500 installed, depending on leaf width and scrollwork complexity.
- Cantilever sliding gate, single panel: $7,200-$12,800 installed, including track, rollers, and post footings.
- Pedestrian gate, matched pair or standalone: $2,400-$5,600 installed, depending on height and lock hardware.
- Operator only, on an existing gate: $1,900-$3,800, including loop detector, safety edges, and programming.
Every one of those prices is written down and handed to you before we order material or start work. That’s Haven Standard Clause 1, and it applies to every job we do in Calabasas. If another company gave you a written estimate for the same scope, bring us the paperwork and we’ll review it at no cost.
We Also Serve Cities Near Calabasas
Our Gate Installation team covers Calabasas and the surrounding communities, including West Hills, Canoga Park, Agoura Hills, and Tarzana. If you’re just over the line from Calabasas, the same crew, the same written pricing, and the same 365-Day Done Right Promise apply. Call (661) 495-2023 and tell us which side of the 101 you’re on.
Serving Calabasas, CA - Our Local Coverage Area
We’re based in the Calabasas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Calabasas
Yes, in most Calabasas HOA communities, including The Oaks, Calabasas Park Estates, and Mountain View Estates, you’ll need architectural review approval before any new gate goes in. We prepare the material spec, finish sample, and dimension sheet the committee needs, and we’ve seen enough Calabasas applications to know what gets flagged. We handle the paperwork with you, not for you, and we don’t order steel until the approval letter is in hand.
Post-Woolsey Fire replacement gates across the hillside areas of Calabasas were often installed on compressed timelines with posts that weren’t fully cured or sized for the wind load. Five to seven years out, the hinge post leans a few degrees and the leaf drops. We correct the post first, then re-hang the panel. Straightening a panel without fixing the post is a temporary fix on a permanently leaning structure. Call (661) 495-2023 and we’ll measure the sag and show you what the post is actually doing.
Yes. We match scroll profiles, picket spacing, finials, and finish tone to the existing work, and we document the match with photos before we fabricate. On a Calabasas street like Paseo Primario or a hillside lane off Mulholland Highway, a mismatched panel reads from fifty yards away. We won’t install one. If the existing gate was custom built for the house, we treat the replacement as continuation work, not a catalog swap.
Only if it’s wired and programmed to coordinate with the HOA’s master access vendor. In communities like The Oaks of Calabasas, the individual driveway gate often ties into a centralized access-control infrastructure managed by a third-party security vendor. We call that vendor before we replace a board or install a loop detector, because a board swap done blind can lock you out of the community transponder system. This is a workflow step out-of-area contractors routinely miss on their first Calabasas job. We don’t miss it.
Yes. Any automatic gate in Calabasas, residential or not, requires entrapment protection: photo-eyes set to the correct height, safety edges on the closing edge, and an operator with inherent reversing force. We set and photograph every sensor position before the gate is left in service. That record is part of the job file we leave with you. Cheap operators with undersized motors and no photo-eye coverage don’t belong on a gate a child or a dog could walk through. Call (661) 495-2023 for a free measure and a written price.
Written by Adrian Vance, Owner at Vance Gate Repair Chatsworth, serving Calabasas, CA and the surrounding communities. Every job leaves with a written price, a photo record, and a gate that runs the way it should.