Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Chatsworth, CA
Gate access control in Chatsworth usually means one of two things: a keypad or intercom that stopped reading codes after a Santa Ana wind event, or an older estate gate whose phone-entry system no longer works with modern cellular networks. We fix both, and we price the work in writing before we open a single panel. Call (661) 495-2023 and you’ll get a live person, day or night.
Why Chatsworth Homes Are Different
Chatsworth has one of the highest concentrations of equestrian-zoned properties in the San Fernando Valley. That means gate repair here routinely involves 14-to-16-foot double-swing or extra-long sliding gates built to clear horse trailers. The Santa Susana Pass funnels some of the strongest Santa Ana gusts in the Valley directly through these properties, so motor burnout, racked frames, and gates blown off tracks are recurring seasonal problems in this pocket of LA.
The housing stock splits between 1960s-70s ranch-style tract homes and larger equestrian estates near the foothills. Estate properties often have long gravel or decomposed-granite driveways where uneven settling shifts gate posts and knocks automatic operators out of alignment. Summer highs above 105°F degrade rubber gaskets on operators and expand metal tracks, and wood-framed gates warp and bind against latches. These conditions change what fails and how often, so we stock parts accordingly for Chatsworth jobs.
Our Main Chatsworth Services
Most Chatsworth homeowners reach out about one of three things: a gate that won’t open, a gate they’re replacing, or a motor that’s stopped responding. Each has its own page with full detail.
Gate Repair in Chatsworth
A swing gate that drags on decomposed granite, a sliding gate that jumped its track during a wind event, hinges that tore loose from an aging post. Gate Repair in Chatsworth covers the structural and mechanical fixes that keep an existing gate working. On equestrian properties we check track grit and roller wear on every visit because that’s where these gates fail first.
Gate Installation in Chatsworth
Installing a new gate on a Chatsworth lot means accounting for wind load first. A 16-foot double swing on an exposed foothill parcel needs heavier posts and stronger hinges than the same gate in Reseda. Gate Installation in Chatsworth covers measurements, materials, and the written price before any work starts.
Gate Motor & Opener in Chatsworth
Santa Ana gusts overload motor capacitors and strip gear teeth faster here than almost anywhere else in the Valley. Gate Motor & Opener in Chatsworth covers repair and replacement across nine automation brands, including LiftMaster, DoorKing, and Mighty Mule. We bring the replacement parts with us so a motor swap usually finishes the same day.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Chatsworth
Gate access control in Chatsworth spans keypad entry, remote control, phone entry, card readers, and video intercoms. The local twist is age: many 1960s and 1970s ranch homes still use original entry hardware that predates current cellular standards, and estate gates often have commercial-style keypads and card readers originally installed for staff or boarders. Windblown dust from the Santa Susana Pass gets into keypad contacts and card-reader slots, and that grit causes more failures here than in the flatter parts of the Valley. We service every component and run new wiring when needed. For the full scope of this work, see our Gate Access Control service hub.
Keypad Entry
Signs you need it
The keypad accepts some codes but not others, or buttons need multiple presses before they register.
What it costs in Chatsworth
Keypad replacement in Chatsworth typically runs $180-$320 per keypad, plus the service call if we’re not already on site.
How we do it
We test every button and the wiring run, replace the keypad if needed, reprogram codes, and photograph the finished job.
Phone Entry
Signs you need it
Calls from the gate keypad ring once and drop, or the entry system can’t reach cell phones after a carrier update.
What it costs in Chatsworth
Phone-entry repairs and cellular upgrades generally fall between $220 and $450 depending on the existing hardware and whether a new antenna is required.
How we do it
We identify the carrier issue or wiring fault, upgrade the cellular module if the old one is obsolete, and test with your phone before we leave.
What Gate Access Control Costs in Chatsworth
| Item | Typical range in Chatsworth |
|---|---|
| Keypad replacement | $180-$320 |
| Phone entry repair / cellular upgrade | $220-$450 |
| Video intercom install or replacement | $600-$1,000 |
Can you replace just the keypad on my Chatsworth gate?
Yes, keypads are replaced independently of the motor and the rest of the system. Most replacements run $180-$320. Call (661) 495-2023 for a written quote before any work begins.
Do you service card readers on equestrian property gates?
We do. Chatsworth equestrian estates often use card readers and keypads together, and windblown grit from the pass shortens card-reader life. We test, clean, or replace the reader and leave a photo record of the work.
Gate Parts & Welding in Chatsworth
Gate parts and welding in Chatsworth usually starts with an older steel gate on an equestrian parcel: rusted hinge barrels, posts pulled out of plumb by wind load, or track so packed with decomposed granite the rollers have ground flat. On 1960s-era tract homes we see lighter problems, but the wind is the same. This service covers hinge replacement, post replacement, rail repair, custom welding, and gate rollers. See our Gate Parts & Welding hub for the full breakdown.
Hinge Replacement
Signs you need it
The gate sags at the latch side and you can see daylight between the hinge barrels and the post.
What it costs in Chatsworth
Hinge replacement typically runs $120-$270 per hinge depending on gate weight and whether we weld or bolt the new hardware.
How we do it
We cut or unbolt the old hinge, align the gate to the post, and install the replacement with a photo record of every step.
Gate Rollers
Signs you need it
The gate shudders as it slides, sits lower at one end, or leaves metal shavings on the track.
What it costs in Chatsworth
Roller replacement usually falls between $120 and $250 per roller, and track cleaning on decomposed-granite driveways is included when we’re already on site.
How we do it
We remove the old rollers, clean the track, install new ones, and set the gate height so it runs true.
What Gate Parts & Welding Costs in Chatsworth
| Item | Typical range in Chatsworth |
|---|---|
| Hinge replacement (per hinge) | $120-$270 |
| Gate roller replacement (per roller) | $120-$250 |
| Post replacement | $400-$900 |
Is welding always required for a sagging gate?
Not always. If the hinges are bolted and the post is sound, we can replace hardware without welding. If the frame itself is cracked, welding is usually the fix. We’ll show you the photos before we recommend anything.
Can you fix a gate post that shifted on a gravel driveway?
Yes. Decomposed-granite driveways in Chatsworth settle unevenly, and posts pull out of plumb over time. We reset or replace the post, re-anchor it, and realign the operator before we leave.
Brands We Service in Chatsworth
We service Gate Access Control and Gate Parts & Welding across DoorKing, Elite, Mighty Mule, and LiftMaster systems, plus five other automation brands. We stock common parts for these locally, so most repairs finish the same day. See our brands for the full list.
Pricing for Gate Repair in Chatsworth, CA
| Service | Typical range in Chatsworth |
|---|---|
| Keypad replacement | $180-$320 |
| Phone entry repair / cellular upgrade | $220-$450 |
| Video intercom install or replacement | $600-$1,000 |
| Hinge replacement (per hinge) | $120-$270 |
| Gate roller replacement (per roller) | $120-$250 |
| Post replacement | $400-$900 |
Two things push prices up in Chatsworth. Heavy wind load on exposed foothill parcels means heavier hardware, and estate gates built for horse trailers require parts rated for more weight and wider travel. The written price is handed over before work starts, and it doesn’t change unless we find something structural that requires your approval first.
Neighborhoods We Serve in Chatsworth
We cover the full Chatsworth area, from the ranch-style tract blocks west of Topanga Canyon Boulevard up to the equestrian estates along the Santa Susana foothills.
- Chatsworth Lake area
- Lake Manor
- Rancho Simi area
- Chatsworth Hills
- Porter Ranch border streets
Most Chatsworth calls get a same-day or next-day visit. Equestrian properties near the pass should expect a slightly longer lead time for parts, but emergency motor failures get priority dispatch.
Service Area - Cities Near Chatsworth
We also serve the surrounding San Fernando Valley communities. If you’re just over the line in Northridge, CA, Canoga Park, CA, Reseda, CA, or West Hills, CA, the same written-price policy and same-day dispatch apply. Chatsworth is our primary service anchor for the northwest Valley.
Serving Chatsworth, CA - Our Local Coverage Area
We’re based in the Chatsworth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Chatsworth
Most Chatsworth calls get a same-day or next-day visit. Emergency motor failures and gates stuck open get priority dispatch. Call (661) 495-2023 and a live person answers 24/7.
Most motor and access-control replacements don’t require a permit. If your gate is part of a larger fence replacement or a new driveway install, the city may require one. We’ll tell you what applies to your situation before we quote the work.
Yes. Some Chatsworth HOAs have specific requirements for gate height, finish color, and access-control equipment. We document the existing setup before any work starts so the finished job matches the HOA’s requirements and your written quote.
Call (661) 495-2023 for a free estimate. You’ll get a live person, a written price, and a photo record of everything we find and fix.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Chatsworth Customers Say
"Good work on a long driveway gate. Arrived when they said, finished when they said."
- Sofia E."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H.