Gate Installation in Chatsworth - Written Price, Install Date Set

Trusted Gate Installation for Chatsworth Homeowners

A new driveway gate in Chatsworth typically costs between $4,800 and $14,000 installed, depending on whether you choose a swing or sliding design, the material, and whether automation is included. Most single-swing steel gates with a basic motor run $5,500 to $8,500, while a custom double gate with intercom and keypad access starts around $9,000. We give you the written price before anyone picks up a tool, so you know the full number up front. Call (661) 495-2023 and a live person answers, day or night.

Call (661) 495-2023

Adrian Vance started this company in 2014 doing commercial access control, where every wire and limit switch had to be documented for the next technician. That habit never left. Today, every residential gate we install in Chatsworth gets the same treatment: a written scope, a written price, and a photographed record of what we set, what we mounted, and what we left behind. 22,000+ gates later, we still operate under The Haven Standard: Clause 1, have it in writing. Clause 4, evidence on every job.

When you call, you get a background-checked technician whose name and photo come to you before arrival. We service nine automation brands, including LiftMaster, FAAC, and Elite, so whatever motor you already have, we can work with it rather than steering you toward a replacement you may not need.

What Our Gate Installation Service Includes

Gate installation in Chatsworth covers everything from a simple manual pedestrian gate to a fully automated double driveway gate with access control. We pour or set posts, fabricate or assemble the gate, hang it square, and when automation is part of the job, we wire the motor, set the travel limits, and install the safety edges and photo-eyes. Here is what each type of installation involves.

Driveway Gate Installation

A driveway gate is the one you pull up to every day, and it takes the most wear of any gate on the property. We install both single and double driveway gates in Chatsworth, sized to your opening and hung on posts set in concrete below the frost line the way city code expects. The gate gets welded or bolted hinges, a positive stop so it can’t over-travel, and if automation is part of the job, a motor matched to the gate’s weight and cycle count. Before we leave, you get a written record of the hinge spacing, the post depth, and the motor’s torque settings.

Pedestrian Gate Installation

A pedestrian gate is a separate walk-through gate, usually beside the driveway gate, so people don’t have to open the vehicle gate every time they walk out. In Chatsworth, these are often specified as 36 or 42 inch steel gates with self-closing hinges when they open into a pool yard, which is a code requirement. We set the post plumb, hang the gate with the right reveal, and install the closer or magnetic latch so it catches every time. We also photograph the latch alignment before we leave.

Sliding Gate Installation

A sliding gate runs horizontally on a track or a cantilever system, and it’s the right choice when the driveway slopes upward away from the street, since a swing gate would scrape or bind. Chatsworth properties with long, uphill drives or tight setbacks often need this style. We install the track with the proper bedding, set the rollers, and for cantilever gates, we set the two posts that carry the gate’s full weight without a ground track. The gate gets a positive stop at both ends of travel and a motor sized to the gate’s mass, not just its width.

Swing Gate Installation

A swing gate opens inward or outward on hinges, and it’s the most common style in Chatsworth because it works on level driveways and costs less than a sliding setup. We hang swing gates with hinges that carry the weight evenly, and we set the posts with enough depth and concrete to hold against repeated cycles. If you’re automating it, we match the opener arm to the gate leaf weight and install the safety edge along the closing side, so if anything is in the way, the gate stops and reverses.

Double Gate Installation

A double gate is two leaves that meet in the middle, used when the driveway opening is too wide for a single leaf. In Chatsworth, we install double gates up to 24 feet wide, with the two leaves hung to overlap or meet clean at the center, depending on the design. The trick with double gates is keeping both leaves square over time, so we set the posts on a shared line and install a center drop rod or catch when the gate carries a motor. If both leaves are automated, we sync the motors so they open and close in sequence rather than fighting each other.

Security Gate Installation

A security gate is built heavier than a standard driveway gate, usually with welded steel pickets, a taller height, and a locking system that can’t be reached from outside. Some Chatsworth homeowners want one after a break-in or package theft, and others want it because the gate is the first physical barrier to the property. We install security gates with reinforced posts, tamper-resistant fasteners, and when the job calls for it, a keypad, intercom, or card reader tied to the opener. Under Haven Standard Clause 4, you get a photo log of every weld and every lock strike before we leave the property.

Brands We Service for Gate Installation

We install and automate gates with motors from LiftMaster, FAAC, Elite, and Mighty Mule, among others. LiftMaster is the brand we see most often on Chatsworth driveway gates, and we have installed hundreds of their LA400 and LA500 series swing arms. We stock their mounting brackets and photo-eyes, and we set their travel limits with the gate actually moving, not from a chart, so the motor isn’t pushing past the post.

FAAC and Elite are the two we lean on for heavier gates, especially sliding and double swing gates that cycle more than 20 times a day. FAAC hydraulic operators handle long, heavy leaves well, and Elite’s slide operators are built for continuous duty, which matters if your gate opens for multiple cars every morning. Mighty Mule is the budget-friendly option we recommend when the gate is light and the budget is fixed. Whatever motor is on your gate now, we can service it, and if the gate has no automation yet, we’ll match the motor to the gate’s weight and how often it cycles.

Before

After

Signs You Need Gate Installation Right Now

• The gate is leaning or the post is moving. A gate post that shifts means the footing has failed or the post wasn’t set deep enough to begin with. In Chatsworth’s clay-heavy soil, shallow posts can heave and loosen within a few seasons. Once the post moves, the gate binds, the hinges twist, and the damage compounds. We reset the post, or replace it, and document the depth and concrete volume in the job record.
• The gate scrapes the driveway or won’t close fully. A gate that drags on the concrete is telling you something structural has moved: a hinge is worn, the post is leaning, or the gate frame has torqued. Forcing it open and closed only accelerates the wear. We measure the hinge sag and the reveal gap, then correct it before installing new hardware.
• The existing gate is rusted through at the bottom rail or pickets. Chatsworth’s dry heat spares most steel, but gates near sprinkler overspray or pool water rust from the bottom up. When the bottom rail loses structural integrity, the gate can drop and jam. We replace rusted gates with either galvanized steel or powder-coated options matched to the property’s style.
• The gate is too narrow for modern vehicles. Older Chatsworth homes sometimes have driveway openings that worked for a 1995 sedan but not for a full-size truck or SUV. If you’re pulling mirrors in every morning, it’s time. We widen the opening and install a gate sized so you drive through straight without a three-point turn in the street.
• You want a gate where none exists, and security is the reason. An open driveway invites two things: package theft and people walking onto the property to check car doors. A new gate, even a simple single swing, changes what the property communicates. We’ll install a gate that fits the house, not a fortress – unless a fortress is what you’re after.

Our Gate Installation Process - Step by Step

Every installation follows the same sequence, and you get a written price before step one begins. Here is how the job goes from phone call to completed gate.

1. 1
   On-site measure and written estimate. We measure the opening width, check the grade, and look at the soil where the posts will go. We also look at the electrical path if automation is part of the job. You get a written price broken down by materials and labor before we leave that first visit – not after we start. Clause 1, in writing, on the first visit.
2. 2
   Design and material selection. We walk you through gate style, material gauge, and finish options. Steel gauge matters more than most people realize: a 16-gauge frame with 18-gauge pickets is adequate for a manual gate, but an automated double gate should be 14-gauge or heavier. We’ll recommend the right combination for the gate’s weight and how many cycles a day it will see.
3. 3
   Post setting and gate fabrication or assembly. We dig post holes below the frost line, set the posts in concrete, and brace them until the concrete cures. The gate itself is either fabricated off-site to your measurements or assembled from a kit, depending on what you selected. The posts get checked for plumb in two directions before concrete is poured.
4. 4
   Gate hanging and hardware installation. We hang the gate, adjust the hinges so the leaf swings level without dragging, and install the latch, stop, and any closer hardware. For automated gates, we mount the motor, run the low-voltage wiring, set the travel limits, and position the photo-eyes roughly 10 to 20 inches off the ground, where they will actually see a vehicle or a child. We photograph the limit switch positions and the safety edge mounting before testing.
5. 5
   Testing, documentation, and walkthrough. The gate gets cycled a minimum of 15 times, including a mid-cycle reversal test on the safety edges and photo-eyes. We then walk you through operation, hand you a written record of what was installed, with photos, and explain the 365-Day Done Right Promise. If anything is not right within a year, we make it right. No argument, no fee.

How Much Does Gate Installation Cost in Chatsworth?

Gate Installation Near Chatsworth - Our Service Area

We install gates throughout the northwest San Fernando Valley and into the surrounding areas. From our base serving Chatsworth, we cover Canoga Park, Northridge, West Hills, Reseda, Granada Hills, Tarzana, Encino, Panorama City, Calabasas, Sylmar, and Simi Valley. Doorways and driveways in the Valley vary from 1950s ranch houses to hillside contemporary, and the gate needs change with each. If you’re exploring options for nearby areas, we have detailed pages on Gate Installation in Canoga Park and Gate Installation in Northridge. For the full picture of what we do beyond installation, start with our home page or the Gate Installation in Chatsworth guide.

Frequently Asked Questions - Gate Installation in Chatsworth

Schedule Your Gate Installation Service in Chatsworth Today

Your gate starts with a measurement and a written price, not with a vague estimate you have to trust. Call (661) 495-2023 today and a live person answers, 24/7, to schedule a free on-site measure. You get the price in writing before any work begins, the documentation after every visit, and a full year of Done Right coverage. No obligation, no pressure, just the number in dollars.

Written by Adrian Vance, Owner at Vance Gate Repair Chatsworth, serving Chatsworth since 2014.